Zao QiangElevator manufacturerPrice increase year-on-year

High-altitude work such as high-altitude cleaning. Professional sales elevator manufacturers sell at high prices， door-to-door service， and integrity management!

6Unscrew the dustproof outside of the elevator flangeScrew， adjust the PCS system ring so that its side hole is aligned with the dust hole， and tighten the hexagon socket. Then， remove the motor shaft key.

qZao QiangTalking about the daily maintenance and use of the motor of the hydraulic lifting platform. Overload is strictly prohibited. Overload will increase the burden of the motor and cause the motor to burn out in serious cases.

The lifting stage can realize the lifting of the double-deck table. It can also be assembled into ladder multi-scape and multi-level stairs as required to form a group of lifting platforms，hydraulic lift which can form different steps within the range of travel，NeustadtElectric three wheel hydraulic lifting platformScope of application and issues encountered during use enrich the stage multifunctional effect. The telescopic stage is applicable to the equipment of the auditorium， theater multi-function hall， studio， cultural stadium， etc. The telescopic stage adopts an effective guidance system， which makes the gap between the telescopic platform and the fixed platform small， stable and stepless speed change during the translation process The synchronous device and electric device adopt the low-speed and large-torque drive device. During the telescopic process， free， telescopic in place，hydraulic lift and can automatically realize the application and characteristics of leveling stage elevator. The rotating stage has many functions， such as lifting， rotating， tilting， and so on. Self-locking， interlock， travel switch， mechanical limit， hydraulic explosion-proof and other protective measures are adopted. It makes the stage stable and reliable， and is widely used in halls，hydraulic lift theaters， multi-function halls，NeustadtElectric three wheel hydraulic lifting platformScope of application and issues encountered during use studios， hotels and other cultural and entertainment places. Features: the hydraulic lifting stage is compact and stable in structure， and can adapt to high frequency continuous operation.

QToCatOnce the goods elevator breaks down， the maintenance unit will arrive at the site within the specified time (the specific time is not minutes according to Beijing regulations).

ZrIn case of overheating of the hydraulic elevator motor， stop it in time and continue to operate after troubleshooting. The motor bearing lubrication shall be good.

The single-column aluminum alloy elevator is easy to operate. The gantry cross-frame assembly is easy， the operation is labor-saving， and the movement is flexible. It can cross obstacles such as fixed seats with a height of m， and can work stably on the steps. It is made of high-strength rectangular steel pipe with good rigidity and stability. Equipped with universal casters，Hydraulic elevator_ Cargo elevator_ Cargo elevator_ Hydraulic lift - goods lift manufacturer flexible. The span of the frame at both ends is adjustable， which can be applied to the requirements of crossing different obstacles. The two ends of the rack are vertically adjustable and can be used for operation on a slope or step with a certain slope.

High-altitude work such as high-altitude cleaning. Professional sales elevator manufacturers sell at high prices， door-to-door service， on-site settlement， and integrity management!

qThe lifting platform shall be placed in a trench position， and the corresponding anti-slip work shall be done; Remove the gear box of the equipment， remove the axle oil box， and take out the lower bearing and oil suction device; Slowly test run and check whether the surface around the axle diameter is seriously damaged; If the damage is serious and tungsten is occupied polish it with oilstone; Under the motor， and with the sleeper on the trench edge inside the rail， use the jack to periodically pull the motor and remove the upper tile; How to solve the damage of the important equipment in the lifting platform? Check the status of the bearing pads and oil absorbers， investigate the cause of the damage， replace the bearing pads， and clean the bearing oil box; After assembling all parts and components， install a new oil suction device on the axle oil box and inject clean axle oilInput gear lubricating oil; Burn of axle box bearing is the most common one， which is the outer row bearing. If it is serious， the axle box and wheel set will be fixed together， affecting the equipment operation.

HIs the water cooling and air cooling of the hydraulic station the same? Professional sales elevator manufacturer safety， pay attention to protect the electronic instruments and other precision parts from acid corrosion during use.

The normally closed valve is dirty; The solution is to remove the normally closed valve and use detergent or cleaning.

To install the lifting platform， first install the guide rail. The guide rail fixed hydraulic lifting device is a device used to fix the linear guide rail or roller to the wall.

Quality recommendationnThe contact surface of each departments brush shall be kept clean， and the brush pressure shall be adjusted to make the contact area not less than %

GThe hydraulic lifting platform can be divided into: four-wheel mobile type， two-wheel traction type， vehicle modified type vehicle type， auxiliary self-propelled type， and the lifting height varies from a meter to meter.

In todays society，“ Brand” It is an intangible asset. As long as a product has a brand， it will have a certain popularity， cohesion and diffusion.

vZao QiangWhat kinds of elevators are there? There are many types of such equipment， for example， they can be divided into fixed lifting devices and vehicle-mounted lifting devices according to the form of movement. The so-called fixed lifting is generally fixed at one place， and then the lifting operation can be carried out. This type of lifting equipment is usually used more on the assembly line. Some large production lines need to lift the material to a certain position when loading the material， and then put it on the production line for production， so a special lifting device needs to be fixed at a certain position on the production line.

dXWith the progress of the times， the development of science and technology， and the growth of the economy， there are tens of thousands of types of elevators sold on the market. But how to choose mobile lifting platforms? You know， elevators solve some problems of aerial work and provide convenience for aerial work. Now lets follow the editor to see how to choose mobile elevators.

Advantages and application fields of elevator and lifting platform The lifting mechanism is made of high-strength manganese steel giant tube. It is equipped with safety maintenance equipment to avoid overload of the elevator. It is equipped with a safety maintenance valve to avoid hydraulic pipeline cracking. Emergency lowering equipment is provided in case of power failure. This product is applicable to mobile aerial work such as aerial equipment and maintenance in various industries.